Wacom Customer Support page: https://support.wacom.com/

Product Registration:
Please register our products on https://www.wacom.com/register
How do I register my Wacom device?

Drawing software:
If you are not able to register, please use the trial version of the software below and try to register again at a later date.
Wacom Drivers:
March 2018: New driver released for Windows (6.3.33-3) and Mac (6.3.33-5). Download drivers and release notes here: http://www.wacom.com/support/product-support/drivers

Touch not working correctly after Driver 6.3.33-5 update for Mac:
http://forum.wacom.eu/viewtopic.php?f=11&t=2581

Mac OS 10.14 Mojave:
Upgrading to Mac OS 10.14 Mojave? A new Mac OSX security feature requires some additional changes to run the Wacom Driver correctly. Please see the instructions found on our support page here. Also, If you have any issues, please try a clean driver install. Follow the steps here.

Companion 1 stays blocked in the Bios Menu

Cintiq Companion, Cintiq Companion Hybrid, Cintiq Companion 2 and MobileStudio Pro
Talulu
Posts: 1
Joined: Sat 23. Feb 2019, 13:24

Companion 1 stays blocked in the Bios Menu

Postby Talulu » Sat 23. Feb 2019, 13:29

Bonjour.
J'ai un soucis quand j'allume ma companion 1, windows ne se lance pas et l'ecran reste bloqué sur ce que je pense etre le bios.
Même quand j'appuie sur save and exit, il ne se passe rien.
Elle est maintenant hors garantie donc ca sera trop chère de l'envoyer en allemagne pour réparation mais est ce que quelqu'un a déjà eu le problème ou y a t'il un moyen de faire booter windows via l'usb?
Merci a tous!


Hello.
I have a problem when I turn on my company 1, windows doesn't start and the screen gets stuck on what I think is the bios.
Even when I press save and exit, nothing happens.
It is now out of warranty so it will be too expensive to send it to Germany for repair but has anyone already had the problem or is there a way to get windows booted via usb?
Thank you all!
Last edited by wacom5 on Mon 25. Feb 2019, 09:49, edited 1 time in total.
Reason: Use English only please

wacom5
Posts: 569
Joined: Tue 8. Aug 2017, 14:35

Re: Companion 1 stays blocked in the Bios Menu

Postby wacom5 » Mon 25. Feb 2019, 09:51

Hi.
Seems that your SSD is no longer working and this is why the Cintiq Companion opens the BIOS on boot. You would need to have the SSD replaced.
If you need assistance, please contact our https://support.wacom.com


Return to “Pen Computers”