Page 1 of 1

Wacom Cintiq Pro 13 - No Signal

Posted: Mon 21. Aug 2017, 20:13
by Airborne
I have recently purchased the Cintiq Pro 13 and began my initial setup. However, soon after I came across my first problem. The USB C on my Asus Q553U Notebook PC was not supported by the Cintiq display. Due to my computer having an HDMI port, I decided to purchase the "Insignia™ - Mini DisplayPort-to-HDMI Adapter". Using the Wacom Link that was shipped with the Cintiq, I plugged each of the corresponding inputs to their outputs. (Mini Display to HDMI, HDMI to PC, Mini Display to Wacom Link, USB to PC, USB to Wacom Link, USB C to Cintiq) After doing so, the same "No Signal" message appeared. (My laptop does still receive data from the Cintiq, for the Wacom application does show the Cintiq as a connected display.) To test if the display was faulty, I connected it's USB C to my friend's HP Specter x360 and it worked perfectly. Please guide me through this problem and inform me if my laptop will never be able to work alongside the Cintiq. Thanks, and get back to me ASAP so the 30 day return policy does not expire!

Re: Wacom Cintiq Pro 13 - No Signal

Posted: Tue 22. Aug 2017, 06:48
by wacom1
For a direct USB-C to USB-C connection of the Cintiq Pro, the USB-C on the computer needs to support 'USB-C Alternate Mode / Displayport'. Unfortunately, not all computers with USB-C support this mode. In this case you need to use the Wacom Link adapter included. Attach one cable to USB - this is for the tablet data part of the device - and a displayport cable for the display portion.

For HDMI connections there exist a few HDMI to displayport adapters, that were tested successfully. Please check the FAQ for this under: http://www.wacom.com/en-us/support/faqs ... 20computer

Re: Wacom Cintiq Pro 13 - No Signal

Posted: Wed 30. Oct 2019, 18:25
by afidaht
How's yours? I have the same issue