When painting in photoshop my tilt is registering in the opposite direction. It was working fine as I was painting and then mid way through my session the tilt direction shifted. I'm not sure if I triggered a keyboard shortcut or something, I cant find any information on how to change it back. I reset my Photoshop settings and updated the wacom driver and restarted everything, but it hasn't helped.
To clarify, this isn't a brush rotation issue. When I hold the grip pen normally in the right hand, with the pen angled toward the top left of the tablet, I would expect the 'spray' from the brush to go from the brush cursor out to the top left of teh canvas. Instead, the 'spray' goes from the cursor to the bottom right.
Thanks for your help in advance.
Wacom Customer Support page: https://support.wacom.com/
Wacom Product Resources - Drivers, Manuals, Warranty Information & Others
Product Registration:
Please register our products on https://www.wacom.com/register
How do I register my Wacom device?
About ARM architecture-based computer support:
Check our FAQ: Does the Wacom driver support ARM architecture-based computers?
Wacom Product Resources - Drivers, Manuals, Warranty Information & Others
Product Registration:
Please register our products on https://www.wacom.com/register
How do I register my Wacom device?
About ARM architecture-based computer support:
Check our FAQ: Does the Wacom driver support ARM architecture-based computers?
Tilt direction is Inversed - Intuos Pro
Re: Tilt direction is Inversed - Intuos Pro
You can check in the tablet driver diagnostics, that tilt in x direction and tilt in y direction is measured. You might reset the driver settings to be sure, that you have the default setting. Based on this information Photoshop calculates the 360 degree tilt angle and spray direction.
Re: Tilt direction is Inversed - Intuos Pro
Thanks, Ill give that a go and let you know. Not sure that's it though, as I did set the tablet settings to the default without any change.
Re: Tilt direction is Inversed - Intuos Pro
In Diagnostics the tilt is being measured, and it seems to be correct value based on this excerpt I found in the manual:
Perhaps the issue is in photoshop? I keep wondering if I triggered a keyboard shortcut unintentional. Though I reset all my Photoshop preferences and that didn't fix it. Any other thoughts?
Thanks Again
4. Test tilt for the x-axis by moving the pen from a vertical position toward the right; the X TILT value should change from approximately 0 to +60. Now move the tool to the left of vertical; the X TILT value should change from approximately 0 to -60.
5. Test tilt for the y-axis by moving the pen from a vertical position toward the bottom of the tablet; the Y TILT value should change from approximately 0 to +60. Now move the tool toward the top of the tablet; the Y TILT value should change from approximately 0 to -60.
Perhaps the issue is in photoshop? I keep wondering if I triggered a keyboard shortcut unintentional. Though I reset all my Photoshop preferences and that didn't fix it. Any other thoughts?
Thanks Again