Wacom Customer Support page: https://support.wacom.com/

Cintiq Pro 24 - Fan Speed:
A firmware update was released that should allow you to adjust the fan speed. Please see: here

Windows 10 Fall 2018 Update:
Updating to the newest Windows 10 Fall update? Wacom has identified a few issues within the latest update. Pan/Scroll is not working correctly in some applications. Also, Modifier Clicks do not work when assigned to pen buttons or ExpressKeys, see the screenshot below. The Wacom driver team has submitted a bug report with Microsoft for these issues and will continue to work with them until it is fixed. More information can be found here: here

Mac OS 10.14 Mojave:
Upgrading to Mac OS 10.14 Mojave? A new Mac OSX security feature requires some additional changes to run the Wacom Driver correctly. Please see the instructions found on our support page here. Also, If you have any issues, please try a clean driver install. Follow the steps here.

Wacom Drivers:
December 2018: New driver released for Windows (6.3.32-3) and Mac (6.3.32-3). Download drivers and release notes here: http://www.wacom.com/support/product-support/drivers

Inkspace App Updates: http://forum.wacom.eu/viewtopic.php?f=9&t=1949#p5742

Google Chrome Why is Google Chrome not accepting clicks or is lagging?

Registration
Please register our products on https://www.wacom.com/register
How do I register my Wacom device?

Intuos Pro M 2017 Touch not working

Intuos, Intuos Pro, Bamboo, Graphire, etc.
rohmux1980
Posts: 1
Joined: Sun 11. Jun 2017, 17:29

Intuos Pro M 2017 Touch not working

Postby rohmux1980 » Sun 11. Jun 2017, 19:05

Hello, i'm new in this forum and hope to get some help.

I just bought a new Intuos Pro M 2017. When i first start Linux on my computer i could get almost everything to work including Touch.
After Setting up the driver in Windows (Dual Boot) and upgrading Firmware for pen, bluetooth and express keys, touch isn't working anymore but everything else is ok. The same is now on linux.
I then tried to use the tablet on my mac book pro but with the same result.
I reinstalled the Driver twice. The only diagnostic hint i got through the manual was checking the lights on the tablet when touching the surface but that didn't work too.
Is there anything else i can do before sending the device back?
Thanks!

PS: Using the search with words like "touch" "problem" and so on will not work as they are to common, sorry if i missed a post about this issue.

edenexposito
Posts: 1
Joined: Mon 10. Jul 2017, 17:41

Re: Intuos Pro M 2017 Touch not working

Postby edenexposito » Mon 10. Jul 2017, 17:42

I Have the same problem. Have you resolved that?

OCDnibwear
Posts: 18
Joined: Thu 31. Aug 2017, 13:54

Re: Intuos Pro M 2017 Touch not working

Postby OCDnibwear » Thu 31. Aug 2017, 14:29

You may want to try seeing if the touch button on the side of the tablet is switched on. If it was switched on, try switching it off for a moment and switch it back on again.

If that still won't work you may want to try something like these under linux (via terminal):

Code: Select all

xsetwacom --get "Wacom Intuos Pro M Finger touch" touch

To see if the touch is either "on" or "off".

Code: Select all

xsetwacom --set "Wacom Intuos Pro M Finger touch" touch off

To turn touch functionality off.

Code: Select all

xsetwacom --set "Wacom Intuos Pro M Finger touch" touch on

To turn touch functionality on.

Source(s):
* There are no problems, only solutions: How to configure Wacom Intuos Express Keys on Linux
* Disabling Wacom Bamboo touch in Linux | East Asia Student

As a last ditch effort to get touch functionality working again (for me, but I have never updated the firmware due to OS incompatibility), you may want to try unplugging the USB cable for a brief moment and plug it back in to see if you can regain touch functionality.
Tablet: Wacom Intuos Pro Large (2017 "Paper Edition")

Code: Select all

Bus 003 Device 006: ID 056a:0358 Wacom Co., Ltd PTH-860 [Intuos Pro (L)]

OS: Archlinux x86_64

wacom1
Posts: 898
Joined: Tue 29. Nov 2016, 09:46

Re: Intuos Pro M 2017 Touch not working

Postby wacom1 » Fri 1. Sep 2017, 12:21

If touch isn't working after firmware update, first restart your machine and test again. Check touch in the driver diagnostics. - If it still fails, it could be that something went wrong during firmware update and you should contact Wacom support for help.


Return to “Pen Tablets”